Iswara Rear Disk Brake

pentavalen

500 RPM
Senior Member
May 16, 2006
524
0
1,516
www.zerotohundred.com
HALLU GUYS

i drive iswara a/b, i wanna place the rear disk brake at my car.
so.. which one of disk brake must i use..
some body told me using mirage disk brake...
it's that true?
 

jombiee

500 RPM
Senior Member
Feb 7, 2005
950
13
3,018
Ghombau
yes its true & its rare & if got one its expensive - cost u around 7-800

FYI the drums on iswara 1.3 are enuff bro, unless u convert ur engine
upgrade the front disc pad, brake servo etc first ! front are far more important
 

fstr

7,000 RPM
Helmet Clan
Senior Member
Apr 19, 2004
7,935
954
3,213
Sahara Desert
there is a STICKY thread in proton/perodua about this topic, pls check it there. all questions and answers are there including pics.
 

e819

1,000 RPM
Senior Member
Dec 7, 2004
1,261
1
3,138
u can use mirage or vr4 pcd 114.3.. itll cos u around 350-450 with installation...

not 2 4get when u buy the rear brake pls ask then for hand brake kabel as well..
all the best bro
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
plug and play rear disc brake for saga iswara is vr4 and mirage only lor...
others need to mod ler....

for example that STICKY thread uncle fred mentioned, he uses putra rear disc.... not really plug and play la... coz u will be running on different PCD for front and rear....

rear disc brake only help alot during higher speed braking... at lower speed, it works jz as same as drum brakes.... if u wanna improve ur braking performance, upgrade brake pump and servo first....
 

jombiee

500 RPM
Senior Member
Feb 7, 2005
950
13
3,018
Ghombau
Bro,
go search for VR4(have to mod a bit) or Mirage(pnp) front with servo, super grip & enough for your stopping power, will cost u around rm250-350 depends on conditions
minimum wheel size are 14, couse the set is BIG, ventilated & cross drilled(if u lucky)

good luck
 

e819

1,000 RPM
Senior Member
Dec 7, 2004
1,261
1
3,138
SM4 servor would be the best if ur thinking to change ur servo...