B beyond_4896 Known Member Senior Member Oct 21, 2005 278 0 1,516 Jul 10, 2006 #1 wanan know the good n the bad for PORTING our engine head.... plan to do it for next mod..
SkYwAlKeR Over 10,000 RPM! Senior Member Mar 12, 2005 10,139 300 5,183 ePoh ~ malacca Visit site Jul 10, 2006 #2 better air/fuel flow... engine revs smoothly... fc drops smoothly as well...
B beyond_4896 Known Member Senior Member Thread starter Oct 21, 2005 278 0 1,516 Jul 10, 2006 #3 if i after porting, need to tuning again ? If got a tune able piggypack. ----- Some more, increase flow got same stress to piston if compare with increase boost.
if i after porting, need to tuning again ? If got a tune able piggypack. ----- Some more, increase flow got same stress to piston if compare with increase boost.
F Fluffy 3,000 RPM Senior Member May 1, 2005 3,870 3 3,138 >>klang<< Jul 11, 2006 #4 nope.dont need to re-tune. porting will give smoother flow..not really an increase in flow..just smoother flow. so dont need to worry about ur pistons.
nope.dont need to re-tune. porting will give smoother flow..not really an increase in flow..just smoother flow. so dont need to worry about ur pistons.
S spyderslr 1,500 RPM Senior Member Mar 1, 2004 1,558 2 3,138 Jul 12, 2006 #5 porting will increase air-flow while polish smoothens the air flow......its advisable to retune after such mods.....
porting will increase air-flow while polish smoothens the air flow......its advisable to retune after such mods.....
F Fluffy 3,000 RPM Senior Member May 1, 2005 3,870 3 3,138 >>klang<< Jul 12, 2006 #6 what needs to be tuned?explain?:_:
S spyderslr 1,500 RPM Senior Member Mar 1, 2004 1,558 2 3,138 Jul 12, 2006 #7 fuel map, ignition timing n cam timing......
gavan 1,000 RPM Senior Member Apr 14, 2004 1,408 3 3,138 Shah Alam Visit site Jul 12, 2006 #8 if you are using a carburator..then tune the AFR =)
F Fluffy 3,000 RPM Senior Member May 1, 2005 3,870 3 3,138 >>klang<< Jul 12, 2006 #9 ahh..okay okay..thanx for the info.:)
B beyond_4896 Known Member Senior Member Thread starter Oct 21, 2005 278 0 1,516 Jul 12, 2006 #10 m using kelisa ejde_t
SkYwAlKeR Over 10,000 RPM! Senior Member Mar 12, 2005 10,139 300 5,183 ePoh ~ malacca Visit site Jul 13, 2006 #11 port and polish can DIY??.... hehe.... no money send to workshop la...
D d3s 500 RPM Senior Member May 1, 2005 899 12 3,018 KL Jul 13, 2006 #12 if u got the tools n the skill then shouldn't b any problem!!! lot damm lot of work...
gavan 1,000 RPM Senior Member Apr 14, 2004 1,408 3 3,138 Shah Alam Visit site Jul 13, 2006 #13 ohh...kelisa.... =) EFi lo..let the ECU tune by itself lo.. =)
F Fluffy 3,000 RPM Senior Member May 1, 2005 3,870 3 3,138 >>klang<< Jul 13, 2006 #14 let the ECu tune by itself? after the PnP the ori ECu can be tuned to match the mod rite?
mohammadikrami Junior Member Senior Member Dec 24, 2005 12 0 1,501 Jul 13, 2006 #15 How much does it cost....??