tapak to fit air ram on to air intake

jeremy

Known Member
Senior Member
Nov 12, 2004
309
2
3,018
kuching-penang
Visit site
can sifu teach me how to diy the tapak? fyi, the air ram is for iswara carb and the diameter of the hole is like 12 cm,, i wana fit into my sunny . my sunny air intake diameter is about 5cm...how ar?? thanksss
 

gohkokeng

2,000 RPM
Senior Member
Feb 21, 2006
2,443
4
1,638
tapak? carb intake?

how to DIY man? u got those steel melting and shaping those meh?

wah sai DIY that is close to impossible
 

Random Post Every 5 Minutes

I'm sure many people already done this.

But here is how I did it.

Prepare the parts :- a 9V IC regulator. ***7809, 2 pcs of 100uF/16V e.capacitors, and a heatsink and pcb.


Then solder all the parts together. The IC pin when seen from front side is Input-Ground-Output. Connect the E.cap at input to ground and output to ground respectively.


Buy the ciggarete jack (since im not...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience