Overboost Motorsports

huakenny

LB Performance
Senior Member

huakenny

LB Performance
Senior Member
Feb 24, 2005
9,128
240
3,163
Kota Kinabalu
Visit site
should still in business, see the ads is everywhere bro.....try call office maybe?
 

yeehau86

Moderator
Helmet Clan
Moderator

yeehau86

Moderator
Helmet Clan
Moderator
Feb 10, 2007
2,856
2,425
1,713
Have you tried one of the below? Apparently the link that you provided are quite old already, the ID that is currently active is here

CONTACT DETAILS
Address - No 28A, First Floor, Jalan PJS 11/7, Bandar Sunway, 46150, Petaling Jaya, Selangor, Malaysia (same row as N1 Racing, beside WRC Lighting)
E-Mail - [COLOR="Black"]obmsupport@hotmail.com[/COLOR]
Tel - +603-5611 6628
Mobile - +6012-955 1800
Blackberry Pin - 2284DEF5
Website - OVER BOOST - MOTORSPORTS
MSN - [COLOR="black"]obmsupport@hotmail.com[/COLOR]
Skype ID - overboost-motorsports
Facebook - Over Boost - Motorsports | Facebook
Mudah - PRO Niaga: Over Boost - Motorsports

CLICK HERE FOR CONTACT FORM
 

Over Boost - Motorsports

Beyond 20,000 RPM!

Over Boost - Motorsports

Beyond 20,000 RPM!
Oct 11, 2010
21,312
11
638
Bandar Sunway
www.overboost-motorsports.com
Hi NPK,

We apologize if you could not get hold of us previously, however if anything in the future please kindly call our office number and we will definitely assist you. We had not received any calls from you as well.

I had check that your purchase from us was on the 16th august 2011, and we had did a replacement for you in December which we had sent over to innovate to check it out and they had replace you with new Bosch LSU 4.2 Wideband sensor and the gauge meter as well. They had tested the unit you had and works well. DId you calibrate the sensors?

No worries mate, we will solve this issue for you.

Please do call me or PM me your number and we will gladly call you back.

Thanks,
Kenzo
 
Last edited:

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
I had check that your purchase from us was on the 16th august 2011, and we had did a replacement for you in December which we had sent over to innovate to check it out and they had replace you with new Bosch LSU 4.2 Wideband sensor and the gauge meter as well. They had tested the unit you had and works well. DId you calibrate the sensors?


This is not what you told me and I am very sure of it...Innovate changed the sensor but gave me back the same (OLD) meter.

After getting the "repaired" kit, I send you video of the failure of the "repaired" meter...you said that you will get the whole set replaced(this was about March 2012).

Till now I am awaiting for the replacement set to arrive....wonder why I only get your response when I post here( numerous and repeated SMS and Whatapps NOT replied)?

:biggrin::biggrin::biggrin::biggrin:

Anyway, I just emailed the video in case you have forgotten.

Please let me know when the replacement kit can arrive....Thanks in advance.

NPK
 
Last edited:

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Hi Kenzo,

Still awaiting reply on the replacement set of MTX...been months since I bought the set and even after repair, unit still can't work....been losing MONTHS.

Regretted buying this low quality, low reliability AFR meter.

NPK
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Left msgs without reply....

I am in Semenyih...and ran over to the shop a few times (earlier) with hope to get a working MTX.

Not going to waste another trip there unless I know if the replacement set is ready for collection.

Since msgs are not replied, one of my present avenue is here......or shall I just forget about the MTX and take it that I ran into a bad deal?
 
Last edited:

huakenny

LB Performance
Senior Member

huakenny

LB Performance
Senior Member
Feb 24, 2005
9,128
240
3,163
Kota Kinabalu
Visit site
few frens using innovate also said not so reliable, im not sure bout this.

so i got myself the AEM brand, just arrived and hvnt use it. price is rm650

hope it performs as expected without any problems
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
deep regrets buying this Innovate MTX....lost many MONTHS....think AEM is surely a better kit
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,878
8,347
1,713
Petaling Jaya
Left msgs without reply....

I am in Semenyih...and ran over to the shop a few times (earlier) with hope to get a working MTX.

Not going to waste another trip there unless I know if the replacement set is ready for collection.

Since msgs are not replied, one of my present avenue is here......or shall I just forget about the MTX and take it that I ran into a bad deal?
I feel for you brother. Wonder why they are not responding since they answered to you here?
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Bro VR2.....saya pun tak taw lar....:confused: :banghead:
 

huakenny

LB Performance
Senior Member

huakenny

LB Performance
Senior Member
Feb 24, 2005
9,128
240
3,163
Kota Kinabalu
Visit site
err....not sure what actually happened..

since he is registered pro seller in zth, i think he should response to this kind of complaint immediately

just my 2cent
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,878
8,347
1,713
Petaling Jaya
err....not sure what actually happened..

since he is registered pro seller in zth, i think he should response to this kind of complaint immediately

just my 2cent
Yah! not good for them either if they just keep quiet.....
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Maybe still away Cuti Raya?
 

Notoriez

Junior Member
Senior Member

Notoriez

Junior Member
Senior Member
Mar 27, 2006
24
3
1,503
Been using Innovate MTX-L for more than one year now, no major issues except for the LSU.4 sensor always popping out E8 errors after few months of using.

But after re-calibrating, it back to normal and no more errors pop out. Few guys that i know been using this same meter, no issues.
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Guess depends on batch....mine was sent back to Innovate earlier...they acknowledged the problem...changed the sensor(which I doubt was the cause)...unit came back, problem still there....supposed to have a replacement set...still waiting...

I been using Innovate LM1 for many years...still working well
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Read that many shops parallel import Innovate products where local after-sales-support is not provided.

So whether Pro Seller or not, members of zth have to be more careful and don't trust anyone......to me, the Pro-Seller status is misleading
 

vspec

Rookie
Senior Member

vspec

Rookie
Senior Member
Oct 9, 2005
345
74
1,528
Tehran
still haven't solve your problem bro?
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Got call from Overboost today...they are replacing the unit with a more reliable brand!!


Excellent!!! ....
 

npk

Known Member
Senior Member

npk

Known Member
Senior Member
Thread starter
Dec 25, 2005
132
1
1,518
Been awaiting for MONTHS for replacement (AEM)...kept sending msg but no reply.


PENAT KAO-KAO
 
Thread starter Similar threads Forum Replies Date
ericmaxman Car Talk 2
W Car Talk 1