yes bro, jus send to p2 to tune it. Rm17 only.during initial engine start up this morning, i found out that heavy smoke came out from the exhaust tail and it remains for few minutes..is it normal ??...and also the rpm went high as 2500..then it went down to 2000 rpm..until now the rpm is between 1500 - 2000..is it normal ?? should I send to p2 service centre to re-tune..help me2x...
Thanks Punk for replying. CNY holiday mood no time to logon!bro Izso,
ur DIY really inspired me to clean my TB...thx a lot...Immediately, I went to the nearest spare part/hardware shop to buy the necessary stuff..I followed all the steps given by u...unfortunately, during installing all those nuts, hose, sensors,etc, I figure out that the smaller rubber O ring left...I immediately look again at ur DIY and there are two types of rubber O ring...I really thought that smaller O ring is the new one that u want to replace...please advice me the exact location of the small rubber O ring...huhu...
Alza's TB is very similar to Myvi. Not exactly the same but very close. Just make sure you take it out the exact way you put it in. Wrongly placed hoses might get your vacuum messed up. But most of the time everything is unique and isn't interchangeable so you should be ok. Take a picture before you do the DIY and refer to the picture if in doubt.great share. Hopefully alza's tb is same like myvi. what's the result if I messed up the hoses?
Aiya.. first time do something never do it at night. You'll miss alot if you don't see properly. Only thing you should ever do the first time at night is the thing you do with your girlfriend.. in your room.. with Barry White playing in the background.thx bro...I did the TB cleaning process yesterday night..thats why I couldnt notice the smaller o-ring...
Some degreasers leave an oily residue. If it doesn't then no harm using it. Whatever you use, as long as it doesn't leave an oily layer or whatever layer then you're good to goCan I use engine degreaser instead of carb cleaner?
Izso san...I got no GF laaa...haha...by the way, instead of cleaning the TB, what are the other functions of carb cleaner ?? is it can be used to clean the brake components/systems ??Aiya.. first time do something never do it at night. You'll miss alot if you don't see properly. Only thing you should ever do the first time at night is the thing you do with your girlfriend.. in your room.. with Barry White playing in the background.
Nah. You use it to clean your carburetor or your throttle body only as it dries up very fast and attacks oils and some types of dirts only. If you use it on calipers it might not be strong enough to remove brakedust.Izso san...I got no GF laaa...haha...by the way, instead of cleaning the TB, what are the other functions of carb cleaner ?? is it can be used to clean the brake components/systems ??
I personally check the TB every time I service my car. If it's dirty I clean it. If it's not, I leave it. Simple. No real fixed routine schedule.Izso san, all sifus & members of the house,
how frequent we should clean the TB ?? any idea ??
Depends on how dirty it was :Pafter wash d, fc better?
sorry i very noob :slug:
knn i think your finger licking good hole also need to clean :Dafter wash d, fc better?
sorry i very noob :slug: