Charade aura g100

[dewagame]

Anybody know how to expand the rear wheel side mudguard (i dont know what its name)... i wanna install wider sport rim..

Can u help me please

 

[DanzEterna]

roll the fenders, Rm45-50 per side
or knock it out.

 

[dewagame]

Does it need to open some nuts to knock it out

 

[twistedichc]

Does it need to open some nuts to knock it out

watch this

https://www.youtube.com/watch?v=s7Iv42AOZIk

at 24th minute than u'll get the idea

 

[ken yeang]

This one is like the old proton saga rear wheel arch.

For best result, cut out the top arch, and rework to arching shape. Then you can have as much offset as you like.
Rolling fender or knocking the fender could only move the fender out a bit...

Since you car is already at workshop, might as well cut the top arch out.

 

[dewagame]

This one is like the old proton saga rear wheel arch.

For best result, cut out the top arch, and rework to arching shape. Then you can have as much offset as you like.
Rolling fender or knocking the fender could only move the fender out a bit...

Since you car is already at workshop, might as well cut the top arch out.

I dont wanna cut tht fender...
Haha...its my own workshop..i paint it myself

 

[vr2turbo]

This one is like the old proton saga rear wheel arch.

For best result, cut out the top arch, and rework to arching shape. Then you can have as much offset as you like.
Rolling fender or knocking the fender could only move the fender out a bit...

Since you car is already at workshop, might as well cut the top arch out.

Actually rolling the fender only compresses the piece of fender metal that is pointing into the wheel arch. They actually roll in upwards until it meet the side piece of fender to give more space to the tyres in case of more rim offset. To move the fender out from original spot, need to knock out or cut and weld....

---------- Post added at 04:02 PM ---------- 6 hour anti-bump limit - Previous post was at 04:00 PM ----------

I dont wanna cut tht fender...
Haha...its my own workshop..i paint it myself

Without cutting, the furthest you can go is to roll the fender. The tyres will be at par with the fender and not out.....

 

[dewagame]

Thanks gang

 

[ken yeang]

try roll the fender, and knock back the arch lips as far in as possible...
Rolling the fender could be tricky for this case, is the arch isnt the typical wheel arch shape.....

Anyway, please share some photo when the project is completed.

 

[dewagame]

I need to make endorsement first after finish painting

 

[vr2turbo]

I need to make endorsement first after finish painting

Better roll or knock before painting if going to do it......

 

[ken yeang]

TS, did you do the spray paint in your shed, outside?

Any problem with dust sticking to the paint after spraying?

 

[dewagame]

Yes..thats my home..
Yeah..little bit

 

[ken yeang]

wow.....you have the skill and the equipment.

 

[dewagame]

wow.....you have the skill and the equipment.

Haha...i learn from youtube