Brake Pump Bracket

gggti

Known Member
Senior Member

gggti

Known Member
Senior Member
Apr 1, 2005
163
0
3,016
n/a
Can any one custom made BRAKE PUMP BRACKET for satria ?
I have seen brake pump bracket,it seems to be a very simple
bracket but cost more than hunderd bugs.
So i would like to ask any of u can teach me to custom made one ah.
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
do u mean Brake Stopper?

a metal thing dat mounted onto the body(strut) then pushing at de brake pump there for better brake feel??

i'm thinking how to do it too... i saw my customers' car.. Euro R... he uses aircraft alloy to make it... damn nice... n solid.... wira a bit hard... need to get some metal bars n welding machine to do it...
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
ok like this... let me intro a bit...

our brake pump master cylinder unit is mounted on de firewal.. the firewall itself is made of a thin metal sheet... so its not dat solid.... metal sheet can be flexed...

during braking... we press the brake pedal... the brake pump will eventually move forward due to de flexibility of de firewall...

so ppl make this "Brake Stopper" thing to hold back this brake pump thing.. its a metal bracket mounted onto the car body and pushing/holding the brake pump part(metal thing below de resevour) in place. then we wil feel better braking with a firmer feel.

this thing is not so popular in malaysia yet.. i think other countries like japan have them...
 

alan_ling

Known Member
Senior Member

alan_ling

Known Member
Senior Member
Nov 23, 2004
88
0
3,006
brake pump price

tumpang tanya, how much is a half cut price for a front brake pump(not pump servo)
izzit easy to DIY? how?
thanks
 

e39a

500 RPM
Senior Member

e39a

500 RPM
Senior Member
Nov 14, 2003
865
1
3,018
OZ
Visit site
The proper Jap term is BCS, Brake Cylinder Stopper.

Cusco, project miu, other jap companies make most of em...
 

alan_ling

Known Member
Senior Member

alan_ling

Known Member
Senior Member
Nov 23, 2004
88
0
3,006
brake pad

Have you ever encounter, when you change your disk brake pad, the left and the right pad have big diffrent, means the right pad habis but the left pad still got lot. can anyone confirm this?
 

gggti

Known Member
Senior Member

gggti

Known Member
Senior Member
Thread starter
Apr 1, 2005
163
0
3,016
n/a
ha ha ,kguan,i have expected u will reply on this topic .
I think u r the greatest DIYER.
There r lots of cusco imitation on market, just get one n copy the
exact design so don have to spend hundred bug buying it ya.
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
haha... actually got one guy asked me try to do it.... then i think think... if i manage to do it... i can make it for sale...

greatest DIYer?? err.. there are many great DIYer here also... i'm stil learning...

now still in research stage... idea already got.... but need to custom it so dat it fits into my car... if sucessfull i can make n sell.. haha...

making de 1st unit will take some time.... need to borrow my dads welding machine.. kekeke...
 

gggti

Known Member
Senior Member

gggti

Known Member
Senior Member
Thread starter
Apr 1, 2005
163
0
3,016
n/a
Ok,kguan,when u custom made one......successfully...i m ur first buyer,

do pm me ya.serious buyer
 

EFN

1,000 RPM
Senior Member

EFN

1,000 RPM
Senior Member
Dec 28, 2003
1,294
19
3,138
Batu Caves
Visit site
khguan said:
EFN wan not good enough.. cos i saw de bolt screwing directly to de brake pump metal part.. he should "alas" it with another metal piece...
It's is very easy to label other people's workmanship as "not good enough" when you yourself didn't even have the idea how effective my frugal and "primitive" Brake Master Cylinder Stopper works. Please, do investigate first before making any comments. I myself have NEVER mention that any of your idea and workmanship is no good.

For a start you should contact these people who have put their trust in my "not good enough" Brake Stopper:

1. Bucho_JR
2. 4AGZE
3. Hitz
4. Chinozie (The Brake Stopper Saved his car and his life)
5. TRD16V
6. Silvertop
7. Banzai
8. Meg_Omen
9. Autoblackie
10. fandago
11. Olskool
12. FX20V
...and a few more I can's recall now.

So please, go ahead and PM them and ask.....I beg u.
 

GT20v

1,500 RPM
Senior Member

GT20v

1,500 RPM
Senior Member
Nov 15, 2003
1,634
1
3,138
Visit site
khguan said:
EFN wan not good enough.. cos i saw de bolt screwing directly to de brake pump metal part.. he should "alas" it with another metal piece...

emmm its not cool to degrade people stuff like that..even in real world,you wont do it to other people right??
sooo..i guess you know what to do eh? :)
 

bettergrip

Known Member
Senior Member

bettergrip

Known Member
Senior Member
Mar 2, 2005
123
0
3,016
this car community is actually very small lah. you say something... got proper way to say also.

don't simply degrade people's products... people make a hard earned honest living on good name. one post like that... can damage the efforts. in america... kena court case already.
 

olskool

1,000 RPM
Senior Member

olskool

1,000 RPM
Senior Member
Jan 15, 2005
1,069
10
5,138
PJ
khguan said:
EFN wan not good enough.. cos i saw de bolt screwing directly to de brake pump metal part.. he should "alas" it with another metal piece...

Well, as for me...i'd say that the amount paid was certainly worth it eventhough the per say item isn't from what one might call aircraft alloy or NASA items which a evidently isn't easily obtainable for the most of us. Having said so, I've recently put it to 100% test with my AE101 following some drifters up and down a relatively chalenging hill. Mind you, I was the ONLY 1.6 there and i could atleast keep up! Also, my car IS STOCK 20v to the BONE! Including the air filter!! Also, I'M NOT A GOOD DRIVER.. The only thing I have is EFN's AFR and his brake stopper! (his old rims and tires as well ;) ) Why? Simply because I brake late and it held up the whole night WITHOUT ANY BRAKE FADE!

If I were you...I wouldn't look down or discriminate ppls items and ideas as I would have non! A smart person won't just do what ppl do...he'd come up with something NO ONE has though of and affrodable....LIKE EFN!! If he's a nice person...he'd share it with ppl and not keep his discovery to himself!! LIKE EFN!! PEACE DUDE!!
 

vestax

1,500 RPM
Senior Member

vestax

1,500 RPM
Senior Member
Nov 14, 2003
1,573
7
3,138
Damansara Heigh
www.fivio.com
khguan said:
EFN wan not good enough.. cos i saw de bolt screwing directly to de brake pump metal part.. he should "alas" it with another metal piece...
brake pump cylinder material is very durable & solid , so whats the use to alas with another metal ?. if you dont screw at the master pump , where are you going to screw it too ?
 

chinozie

Very Young Member... :D
Senior Member

chinozie

Very Young Member... :D
Senior Member
Jul 5, 2004
3,429
170
5,163
Damansara
4age20v.blogsome.com
khguan said:
EFN wan not good enough.. cos i saw de bolt screwing directly to de brake pump metal part.. he should "alas" it with another metal piece...
what do u mean by "alas" with another metal...???

then what's is the purpose EFN brake stopper got this screw to adjust it... :D

here's my experience with RM25 EFN's brake stopper...to prove that his DIY stuffs is working...

on federal highway...doing 100km/h - 120km/h...then suddenly saw 1 3ton lorry n 1 perdana block the right lane (accident),no light at all, about 100m infront...then do a late braking...manage to stop and manage to switch to middle lane...imagine 100m 120km/h...late braking without tyre sliding or lock...that's is how EFN's stuff save my life...

GT20v and Acoustic also tried my car...n they said that my braking system is in good condition...

Try it, then u can comment it...
it's worth for RM25 what...

Cheers...
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
EFN and bros...

i'm sorry for wat i said earlier... but seriously i think dat pointing a "sharp" bolt onto the brake pump thing may just poke a hole into it in the long run.... perhap u can add a piece of metal to "alas" in between de bolt n de brake pump... dat would be much better... wat i meant was ur BCS(brake cylinder stopper) can be improved further.. anyway... no offence ok? peace bro... :)


gggti,

FYI... now i'm in de process of custom make a BCS for wira... halfway done... i think it will cost more than EFN's BCS due to different design n materials... let me do some testings 1st... duno can be released or not.. heheh... :p
 

GT20v

1,500 RPM
Senior Member

GT20v

1,500 RPM
Senior Member
Nov 15, 2003
1,634
1
3,138
Visit site
its ok bro.........
i think EFN is cool.........
 

olskool

1,000 RPM
Senior Member

olskool

1,000 RPM
Senior Member
Jan 15, 2005
1,069
10
5,138
PJ
khguan...maybe if we added a flat surfaced bracket or somesort it'll help.. anyway, i respect anyone who not only can diy but come up with new ideas.. cheers :D
 
Last edited:

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
i duno how to explain my "alas" thing lar... :p

anyway... my DIY BCS is almost done... already testing it on my car... now using without de "alas" thing...

de braking feel is great!! especially on high speed braking... last time i very lazy wanto use de brake.. now i like to brake brake.. hahaha!!

to those ppl who like to do late braking... this is a very good gadget to use... de braking distance seems to be reduced quite obviously...

just gimme some time for production n finishing... will be out soon... but only for wira lar... n ur wira need to have 2 holes at de side of de strut then only can plug-n-play install... i saw an older wira dun have de holes... new ones should be ok...
 

gavan

1,000 RPM
Senior Member

gavan

1,000 RPM
Senior Member
Apr 14, 2004
1,408
3
3,138
Shah Alam
Visit site
bro EFN, remember me anot? i did the short shift...was soo damn busy didnt get a chance to meet you again to adjust the distance...anywayz, can you make for me a brake stopper for my car???
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
just now i purposely cucuk a wira in front of me.. then suddenly got a car in front came out.. he brake... then i also suddenly brake....

if last time without the BCS... my car sure wheel lock already... but this time... with the BCS.. it didnt lock at all.... the brake feel very responsive.. duno y... this thing saved me once....

these few days very bz... when got time onli take out the thing n make a few more units for sale.... heheh :)
 

GT20v

1,500 RPM
Senior Member

GT20v

1,500 RPM
Senior Member
Nov 15, 2003
1,634
1
3,138
Visit site
gavan,

i think u shud pm him lar..
busy person...
 

gggti

Known Member
Senior Member

gggti

Known Member
Senior Member
Thread starter
Apr 1, 2005
163
0
3,016
n/a
Walau, it has been great argument btw kguan N EFN!!!kguan:
Its good u knows how to apologize,(well educated guy)

EFN:
I think kguan din mean to degrade ur stuff la,only some misunderstanding,
so don be angry la.
Anyway ,ur BCS only cost RM25 ah?
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
yep... gggti is right... mayb i was too straightforward when i tried to give comments on EFN's stuff... mayb i should say "EFN's BCS can be improved..."

pls dun blame me cos all of the aftermarket BCS i saw has a "alas" thing at de brake cylinder there....

anyway.. i really appologize for watever inconvenience n the "boh-song-ness" caused...
 

darkbob

Known Member
Senior Member

darkbob

Known Member
Senior Member
Dec 8, 2004
152
0
3,016
Johor Bahry
hmm...

i havent seen any of these BCS yet in the market around JB.. maybe i have not been looking properly..

looks like it can be DIY...

anyone has a design i can DIY on my Iswara ? sounds pretty cool !
 

khguan

4,000 RPM
Senior Member

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
i have already sucessfuly made a BCS for Wira...now making a few units to sell... if the responds is good... then i'll make more...

pics wil be up soon....

darkbob.. yes.. of cos u can DIY one for ur car... u just need to have the materials n proper tools... :)
 

gggti

Known Member
Senior Member

gggti

Known Member
Senior Member
Thread starter
Apr 1, 2005
163
0
3,016
n/a
Halo kguan,PM me ur phone number lei,ur location thx.
 

hitz

1,000 RPM
Senior Member

hitz

1,000 RPM
Senior Member
Nov 17, 2003
1,111
5
5,138
Kepong, KL
I'm one of the EFN customer for the brake stopper and and found that the device really work amazingly.... The look of the device is not that important to me.... but how's it work is the most important part. So I would say thumb up for EFMod product as I'm using a few of his invention as well. Good stuff he got there.... :)
 

darkbob

Known Member
Senior Member

darkbob

Known Member
Senior Member
Dec 8, 2004
152
0
3,016
Johor Bahry
yeahh..

i;m still looking around for anyone who can make a BCS for me.. :D