Cefiro a33 2002 taillight replacement

hex999

Known Member
Oct 27, 2011
378
57
528
Kuala Lumpur
Recently dont know how one my taillights got cracked, I plan to get a halfcut version and just got to know that the JDM version does not fit our current local model, need to change bonnet to make it fit lol. So anyone planning to sell their taillights? or any other options? Tan chong selling a brand new one for RM500 lol.
 

Attachments

Last edited:

doob

Active Member
Senior Member
May 2, 2006
47
0
1,506
What I would do is, goto the headlight tint shop, put a red tint over it.
At least water won't get in :)
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
DIY bro. Just apply those multipurpose epoxy glue (harden under 30seconds ones), that comes in those small stick.
Shelly brand is quite ok. Cost about 1.80 per stick, comes with a fine applicator nozzle. Use sparingly though.

The epoxy is watery, and it will seep into the fine crack via capillary effect, and hardens upon contact. It will seal the crack easily.

No need to buy new lights or even stick film over the crack.
 

Random Post Every 5 Minutes

To all sifu's which may guide my on this problem,

I'm going to installed 390cc injector(mitsu gsr) to take over my std injector 255cc(nissan march).But there's too much question on my mind including some bad explanation from foreman outthere.

I also have a piggy back(r-fit),quite same as safc2.

the question are,

1.can my car started when i start the engine(seem it will be to rich fuel mixture)
2.how to set the afc...do i need to set +50% or -50% to tipu my ecu to send low fuel...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience