Braking issue

lukel95

Known Member
Dec 6, 2016
75
0
6
28
GB birmigham
Hi guys, recently if i full lock to the left and then brake whilst reversing my brakes make a very loud sort of trumpet sound, any ideas?

Sent from my SM-G935F using Tapatalk
 

crazykatak

500 RPM
Senior Member
Mar 1, 2006
776
48
1,528
Subang Jaya
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
 

lukel95

Known Member
Thread starter
Dec 6, 2016
75
0
6
28
GB birmigham
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,998
8,385
1,713
Petaling Jaya
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
Spin the disc and see how it turns. If warp, as it spins can see it wave left and right
 

Random Post Every 5 Minutes

hardcore_detailer said:
Used to be hardcore detailer. Now no time to do all. LOL so must keep it well from start. Tis is what i do

1) send it to nearby roadside car wash. Ask for spray only. Shampoo all don't wan. Should be arounbd RM2 or 3. Unless u have those water jet spray. then can diy at home lor. I live in condo so no choice lor. Very important to spray all those big chunk of sand and dust away.
2)reach home, rinse again with normal pipe.
3) shampoo car with MG nxt shampoo or...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience